Sarmasazan Co.

  • Services
  • News
  • Contact
  • LANGUAGES
    • English English
    • فارسی فارسی
  • HOME
  • PRODUCTS
    • Chillers
    • Fan Coils
    • Cooling Tower
    • Duct Split
    • VRF System
  • CERTIFICATES
  • ABOUT US
خدمات پس از فروش
  • Home
  • News
  • News
  • Cool air chillers: Check the chiller building schematically

Cool air chillers: Check the chiller building schematically

طرز کار چیلر هوا خنک
Sunday, 24 January 2021 / Published in News

Cool air chillers: Check the chiller building schematically

Cool air chillers in most brands on the market, especially up to a capacity of 30 tons, have a similar structure. In this article, we examine the components and function of each part and its role in the performance cycle of different types of chillers.

 

 

Compressor

The compressor (No. 1) has two functions in the refrigerant cycle. The first function is to remove the gaseous refrigerant from the evaporator and reduce its pressure to such an extent that the tendency to evaporate is still present at that temperature. The second function of the compressor is to increase the pressure of the gas refrigerant to a temperature that is higher than the temperature of the cooling medium available to compress the gas refrigerant.

Cool air condenser

A cool air condenser (No. 2) is a heat exchanger in which the heat absorbed by the refrigerant is transferred to the surrounding air. As soon as the heat of the gas refrigerant, which had high pressure and temperature, is transferred to the environment, its temperature drops until the refrigerant enters the liquid phase. A centrifugal blower or moving fans of an engine create airflow between the condenser.

Pressure limiter

(No. 3) This case protects the system against excessive pressure in the refrigerant circuit.

Barometer to measure the maximum pressure

(No. 4) Provides a visual indication of condensing refrigerant pressure.

Liquid input

This input (No. 5) or receiver is installed to keep the system charged during the process.

Filter dryer

Filter dryer (No. 6) removes moisture, contaminants and other prohibited materials that damage system components and reduce efficiency.

Liquid line solenoid

The liquid line solenoid (No. 7) is an electrically refrigerant flow control valve that closes when the compressor stops operating. This valve prevents the liquid refrigerant from moving towards the evaporator and when the compressor restarts, it causes the liquid to fall. The corrugated liquid can cause severe damage to the compressor. This valve is only open when the compressor is on.

Refrigerant display glass

Refrigerant display glass (No. 8), like an eyepiece, allows the operator to monitor the flow of liquid refrigerant. A sufficient amount of refrigerant is transparent depending on the flow of liquid, and bubbles in the liquid indicate a lack of refrigerant. Meanwhile, the humidity indicator also warns about the ingress of moisture into the system and the need to service the device.

Expansion valve

The operation of the expansion valve (No. 9) is to control the flow of liquid refrigerant into the evaporator at a suitable speed to complete the refrigeration cycle. The more cooling required, the more refrigerant enters the evaporator through the expansion valve.
Hot air side valve

Hot air sub-valve (No. 10) (excluding digital compressors) prevents short compressor cycles by adjusting the compressor thinness. When this part is active, the valve opens and allows the hot refrigerant to enter the stream that flows to the evaporator. This reduces the capacity of the system. Devices that use digital compressors perform internal discharge by means of low-compressor separation plates.

operator

An evaporator (No. 11) is a device in which a liquid refrigerant is boiled, absorbs heat when evaporating, and cools the liquid inside the cycle.

Barometer to measure the minimum pressure

(No. 12) Provides a visual indication of the evaporating refrigerant pressure.

The minimum limit set for refrigerant pressure

(No. 13) protects the system against less than normal pressure in the refrigerant circuit.

Cooling pump

The coolant pump (No. 14) circulates the refrigerant in the system cycle.

Freeze limit

Freeze acetate (No. 15) protects the evaporator from possible freezing. This is an option found on most models.

Processing sensor receiver

This device (No. 16) is placed on the cooling flow path inside the cycle. Control decisions are made based on the temperature of this part.

Cooling barometer

(No. 17) Provides a visual indication of the refrigerant pressure entering and supplying the cycle.

Water supply solenoid

(No. 18) When the float switch is activated, the water supply solenoid opens and enters the relevant tank from the source. This returns the relevant tank to the appropriate operating level.

Float tank level switch

This section (No. 19) is related to the appropriate level of water in the reservoir. If the water level goes below the proper level, the tank float switch will activate the water supply solenoid valve to return the tank water level to a suitable level.

Transmitter sensor sensor

This device (No. 20) is placed on the return path of the cooling flow inside the cycle. Note that this option is only available on LE & HE control tools.

Evaporator current switch

The evaporator current switch (No. 21) protects the system against conditions caused by low cooling current, as it causes damage and operational problems in the system. This is an option found on most models.

Reservoir

The cooling tank (No. 22) is installed to have a sufficient volume and to support the flow needs of the chiller. This tank is not under pressure and works to promote the separation of air and strong currents.

 

 

source: https://www.advantageengineering.com/schematics/mkaSchematic.php

What you can read next

انتخاب چیلر هوا خنک
10 criteria you should consider when choosing a cool air chiller!
برج-خنک-کننده-BAC
Cooling Tower Installation Cuts Maintenance Costs
ظرفیت چیلر مورد نیاز
What factors affect the required chiller power and capacity ?!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Search here …

Latest articles

  • کامیون حمل گاز مبرد

    What is refrigerant gas and what is its application in different industries ?!

    What is refrigerant gas? Air conditioners gener...
  • سردخانه کوچک

    Classification of industrial refrigeration types based on different characteristics

    In the previous article, the issue of what is a...
  • سردخانه صنعتی چیست

    What is industrial refrigeration and what is its application in industry?

    Industrial refrigeration is defined as a closed...
  • انتخاب چیلر آب خنک یا هوا خنک

    Buy a cool air chiller or cold water?

    One of the important issues of production cente...
  • کاربرد روفتاپ پکیج

    What is the application of Rooftop package in industries and facilities ?!

    Rooftop applications in various places Warm up ...
  • روفتاپ پکیج چیست

    What is a rooftop package and how does it work ?!

    A rooftop package, as its name implies, is a si...
  • نفوذ ویروس در سیستم تهویه مطبوع

    What is the solution to the virus penetration in the air conditioning system ?!

    The virus and its circulation in the air condit...

Sarma Sazan Jamejam is one of the active and leading groups in the installation industry in Iran. It started its career from the early days with a special structure and coherent and relying on a unique unit in order to meet some needs of builders of luxury construction units, including commercial, residential, as well as hospital and hotel projects. The SSJ eng. Company with years of experience and significant presence in various construction projects from the beginning of its establishment has tried to always improve the quality of all its activities by applying correct and innovative management methods in product selection, sales and especially after-sales services to be customers choice.

PRODUCTS

  • Chillers
  • Fan Coils
  • Cooling Tower
  • Duct Split
  • VRF System

COMPANY INFO

Unit 903, 9th floor, Palladium Plus (2), North Bahman st., Moqaddas Ardabili st., Tehran. Iran

+9821-21600
+9821-22037310
+9821-22037311

info@sarmasazan.co

+989120191386

sarmasazan_jam_e_jam

TOP });